We would like to inform that Donkiz uses our own cookies to keep our user's sessions active and try to improve our services. If you continue browsing, we understand you consent to our use of cookies. More details >>
  Home > Mark Solomos > 


1 - 20 de 6 999
Queries related to "genkernel" :

mark solomos ba

sorted by : Pertinence - Date

Kernel hangs immediately after GRUB, does not run...[solved]

I am trying to set up a new install with my rootfs on LVM on top of dmcrypt. I am using GRUB and UEFI/GPT. Until yesterday, I thought I wouldn't need an initramfs, but I now know that I do. I generated one with genkernel, reran grub2-mkconfig, and rebooted. I observe this behavior: First thing after the UEFI screen, GRUB asks for my LUKS key. I enter it. The GRUB menu displays, and I select my Gentoo install. These lines print out on an otherwise black screen: Code: Loading Linux 3.12.13-gentoo ... Loading initial ramdisk ...
12-03-2015 - gentoo.org save

GRUB can't boot

I installed gentoo from a Archlinux's LiveCD and followed this:... When I restart my computer,grub says:could not find the root device in UUID:XXXXXXXX←/dev/sda4 's UUID Kernel and initramfs were build by genkernel This is my fstab:... And this is grub.cfg:... /dev/sda4 is the root,and /dev/sda3 is boot lsblk: Code: NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sda 8:0 0 298.1G 0 disk ├─sda1 8:1 0 48.8G 0 part ├─sda2 8:2 0 1K 0 part ├─sda3 8:3 0 128M 0 part /boot ├─sda4 8:4 0 20G 0 part └─sda5 ...
28-02-2015 - gentoo.org save

Lsmod live cd to configure kernel?

Hey guys just made the switch from Arch to Gentoo, I have Gentoo installed however I'm missing eth0 (I know there tons of threads about this I've read them haha), I've been using genkernel but I'm convinced my network module isn't compiling with the kernel, so I wanna try manually configuring it. So my question is can you just run "# lsmod" from the livecd and configure the kernel with all the modules that are loaded from the livecd? I do have a network connection enp6s0 when booted in the livecd. That doesn't seem too difficult if that is the case haha. Thanks. I really just want to know if...
23-02-2015 - gentoo.org save

Help newbie with Liva X installation

Ok. Pay no attention to the fact that I've been a member of this forum for over a decade. The fact of the matter is that all those years ago a friend of mine who was a Gentoo user installed the OS onto my laptop, after which he turned it over to me and I administered the system for a time. That was when/why I joined this forum. I spent a few months administering the system before deciding that Gentoo was just too complex and time-consuming for me. I went back to Debian/Ubuntu after that, though I did, some years later, switch from that to Arch. All this is to say that, though I've been a...
01-03-2015 - gentoo.org save


I'm trying to build an initramfs for a headless server using a GPG encrypted LUKS keyfile to unlock a ZFS root system. Using Genkernel (in combination with GnuPG Legacy) I can make a functional initramfs. But as a headless server I'd need to use a SSH connection to unlock it, which Genkernel doesn't do. Dracut can do everything, including SSH, but I can't figure out how to make the ZFSonLinux module for Dracut. I can do a git clone of the whole ZFSonLinux repository, but how can I make the Dracut module? The second problem is the fact that I can't seem to unlock the GPG keyfile remotely, but...
28-02-2015 - gentoo.org save

[solved] genkernel usage error

Running genkernel gives me Code: /usr/bin/genkernel: line 40: /defaults/software.sh: No such file or directory
21-02-2015 - gentoo.org save

Modifying kernel cause system panic unable to boot

Error is common one...sorry. munt VFS file system error, blinking cursur on the top left. After I use genkernel all, then if I go to /usr/src/linux and do make menuconfig to add things like support for KVM, my machine become unbootable. Why is this? What am I doiing wrong? Making one change in kernel .config file should not make machine un-bootable... just wondering ...
20-02-2015 - gentoo.org save

Machine wakes up immediately after suspend

Hi guys. I have a problem (again). My PC wakes up immediately after I send it to sleep (using Gnome3 pause button or using a fancy command like "echo -n 'mem' > /sys/power/state") It goes to sleep and a second later wakes up again. Sometimes it suspends ok. But most of the time it fails. There are some logs on the screen when it goes down and up, but I can't catch them. Where could I search for them? Tried journalctl but found some rubbish: Code: Jan 17 21:19:01 localhost systemd-journal[4061]: Runtime journal is using 8.0M (max allowed 803.9M, trying to leave 1.1G free of 7.8G available →...
21-02-2015 - gentoo.org save

Genkernel doesn't mount ZFS root

I have a system that uses ZFS on top of GPG-LUKS. Using the ~AMD64 version of Genkernel I can get past the LUKS unlock (the stable version panics and stops). However, it won't import the ZFS pool. I get these messages on the console: >> ZFS pool system already imported. >> LUKS detected. Reimporting system cannot import 'system': no such pool available >> Working on device /dev/sdb1... >> Using key device /dev/sda2. Removable device /dev/sda2 mounted. luks-key.gpg on device /dev/sda2 found Enter passphrase: >> LUKS device /dev/sdb1 opened >> Initializing root device... cannot open...
11-02-2015 - gentoo.org save

No keyboard to unlock encrypted root

My root partition is luks encrypted. I have been using a default genkernel configuration with --lvm --luks. the system had seen many reboots, however after the latest boot, I was unable to unlock the partition. the keyboard works in the grub menu and as well as in a chroot environment.I don't know what had changed. I urgently need use of the machine and don't want to backup/restore onto an unencrypted drive if I don't have to. any suggestions are welcome. thanks.
12-02-2015 - gentoo.org save

No 'Ingress Qdisc' and IFB options in kernel config file

Hi, guys, I'm recently planing to do some test on tc in gentoo, according to the doc: ... But when I compling the kernel, I can't find the Ingress qdisc and IFB option: [*] Networking support ---> Networking options ---> [*] QoS and/or fair queueing ---> Ingress Qdisc Device Drivers ---> [*] Networking device support ---> [*] Network core driver support Intermediate Functional Block support The bold options above don't exist in my menu. I just used the kernel config file in the livecd(build time is ...), like this: zcat /proc/config.gz > /root/config/gentoo_kernel.config genkernel...
08-02-2015 - gentoo.org save

[solved]/dev/video* doesn't exist and uvcvideo module not fo

Hi all! First of all I want to apologize for my english if I make some mistakes with the language... In my first post in the forum I bring you a problem that makes me mad. I've a "Creative Webcam" that appears when connected in the dmesg without any relevant error. In lsusb appears detected as well. On my kernel configuration I have the following options MEDIA_SUPPORT [=y] MEDIA_CAMERA_SUPPORT [=y] MEDIA_USB_SUPPORT [=y] USB_VIDEO_CLASS [=m] or USB_VIDEO_CLASS [=y] (I'm trying with both) and some others (if necessary I'll paste all kernel .config) Now the issue is that there isn't any...
14-02-2015 - gentoo.org save

Root not resolved by initramfs on raid0 with mdadm

I have been trying to create an initramfs with genkernel-next, but without success, as documented here . In an attempt to troubleshoot the issue, I tried to create an initramfs with dracut , and even tried multiple permutations of a custom initramfs . None of them worked. I have a booting system right now only because I am booting with an initramfs created with the old genkernel, but it seems I am unable to create a new functioning initramfs by any means. I have banged my head against this problem for many hours over several days, and I am at a loss to figure out what I may be doing wrong. Any...
09-02-2015 - gentoo.org save
Queries related : genkernel next

SystemRescueCd recognizes my touchpad, but direct boot no.

When I boot using SystemRescueCd, my system recognizes my touchpad model. And when I but directly from my kernel (genkernel) my system don't recognizes my touchpad. These are the screenshots of my xfce's touchpad configuration: Booting directly: ... Booting SystemRescueCd: ... Can someone help me?
09-02-2015 - gentoo.org save

Problem migrating from SCSI drives to SATA drives

I have a fairly old PC running Gentoo with a 2.6.38 kernel. The machine was built on a stack of UW160 SCSI drives and an Adaptec 39160 controller and works fine. However, the drives are now rather on the small size so I have installed a SATA controller and a pair of SATA drives. The controller is based on the Sil3512 controller, so I've re-compiled the kernel to include support for sata_sil. That all works well, and I've partitioned the new drives and copied across the filesystems. After doing this, it wouldn't boot, sticking at the grub> prompt resisting all attempts to boot it. I decided to...
09-02-2015 - gentoo.org save

Genkernel + udev + imsm RAID = no root device

This problem has kept me up long enough tonight, so this will be quick and possibly not terribly coherent. I boot off of an imsm (fakeraid) mirror managed by the md kernel subsystem (and mdadm), so I have to boot with an initramfs. I build the initramfs with genkernel. I fully updated my system over the last few days, and tried to boot into the new 3.17.8 kernel. Without warning, genkernel now defaults to UDEV="yes" in its config because I boot with systemd and that supposedly doesn't play well with mdev. However, doing so results in my boot array (md0) not being assembled and a swift kernel...
05-02-2015 - gentoo.org save

Grub Error Collection [Part 1001]

Hi need some help with the installation I've got at first boot: "Booting 'Gentoo Linux 2.6.14-gentoo-r5' root (hd0,0) Filesystem Type is ext2fs, partition type 0x83 kernel /boot/kernel-genkernel-x86_64-2.6.14-gentoo-r5 root=/dev/ram0 init=/linuxrc ramdisk=8192 real_root=/dev/hda3 udev [Linux-bzImage, setup=0x1e00, size=0x23ca50] initrd /boot/initramfs-genkernel-x86_64-2.6.14-gentoo-r5 [Linux-initrd 0xbfdc9000, 0x186559 bytes] Error 28: Selected item cannot fit into memory Press any key....." I use GNU GRUB version 0.96 (631k lower / 3144064K upper memory) and my grub.conf is : default 0...
07-02-2015 - gentoo.org save

Ifconfig: no eth0

Just installed, with a "genkernel all" configuration. After boot, ifconfig detects only the loopback device, "lo". Booting from the installation media, Code: lspci -k | grep -A3 "Ethernet" ... Kernel modules: alx
09-02-2015 - gentoo.org save

[SOLVED] Kernel panic -not syncing: VFS

I tried to install gentoo on my new laptop (I'm gentoo user since 2005) but when I reboot the system the system will be blocked with the message: kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) I googled a lot, but I was not able to find anythings usefull. My laptop is a dell M4800, I7-4910MQ, nvidia Quadro K2100. I started my laptob using the actual gentoo hybrid ISO installed on external usb hd, and start to install gentoo, as usual, by chroot on the new partition on internal hd. After recompiling the kernel and installing and configuring grub2 I have rebotted...
02-02-2015 - gentoo.org save

[wifi] iwlmvm: Unknown symbol dev_coredumpm (err 0)

Hello, I have just installed gentoo on my new laptop, and I am having issues enabling the wifi. My kernel is generated with genkernel, and I only modified a few thing, crypto and wifi stuff. Here is my .config : ... The problem I have is that I don't seem to be able to enable my iwlmvm and iwlwifi modules : Code: trenzalore ~ # dmesg |grep iwl [ ...] iwlwifi 0000:02:00.0: loaded firmware version op_mode iwlmvm [ ...] iwlmvm: Unknown symbol dev_coredumpm (err 0) [ ...] iwlwifi 0000:02:00.0: failed to load module iwlmvm (error 256), is dynamic loading enabled? [ ...] iwlmvm:...
07-02-2015 - gentoo.org save
1 2 3 4 5 6 7 8 9 10 Next »   
  Create a free email alert for this search or    RSS flow for your search
Receive listings by email for :

My email address :

Enter the following security code *

Error: invalid email address
You may cancel this alert at any time